5th Gen Toyota 4Runner Prinsu Roof Rack Full Non-Drill | 2010-2020
Regular price$0.00
Frontrunner
Toyota Tacoma Pickup Truck (2005-Current) Slimline II Load Bed Rack Kit
Regular price$0.00
This 2166mm/85.3” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and a set of Foot Rails to mount the Slimline II Tray to the 5th Gen 4Runner. It easily installed using the 8 existing factory mounting points. Drilling is required to secure the front Foot Rails.
Consisting of:
1 x FATF006 - Toyota 4runner (2009-Current) Full Rack Foot Rails - by Front Runner 1 x RRSTD11 - Slimline II Tray - 1255mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium 3CR12Stainless Steel
Approximate Installed Weight 37kg (80lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Frontrunner
Toyota Tacoma (2005-Current) Slimline II Roof Rack Kit
Regular price$0.00
This 2166mm/85.3” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and a set of Foot Rails to mount the Slimline II Tray to the 5th Gen 4Runner. It easily installed using the 8 existing factory mounting points. Drilling is required to secure the front Foot Rails.
Consisting of:
1 x FATF006 - Toyota 4runner (2009-Current) Full Rack Foot Rails - by Front Runner 1 x RRSTD11 - Slimline II Tray - 1255mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium 3CR12Stainless Steel
Approximate Installed Weight 37kg (80lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Frontrunner
Toyota 4Runner (5th Gen) Slimline II Roof Rack Kit
Regular price$0.00
This 2166mm/85.3” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and a set of Foot Rails to mount the Slimline II Tray to the 5th Gen 4Runner. It easily installed using the 8 existing factory mounting points. Drilling is required to secure the front Foot Rails.
Consisting of:
1 x FATF006 - Toyota 4runner (2009-Current) Full Rack Foot Rails - by Front Runner 1 x RRSTD11 - Slimline II Tray - 1255mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium 3CR12Stainless Steel
Approximate Installed Weight 37kg (80lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Rhino-Rack
Heavy Duty 2500
Regular price$0.00
The Heavy Duty 2500 roof rack system is matched to fit the contours of your vehicle's roof. Easy to install and remove - it is ideal as a non permanent solution yet offers great strength and durability.
Features
With special moulded pads and custom-fit clamps tailored to fit your vehicle's door jamb curves, the HD 2500 roof rack is secure, strong and efficient. You can really relax behind the wheel knowing that your gear is safe.
Features
Santoprene rubber pads won't rub off onto your vehicle
Incredible strength due to Glass Reinforced Nylon which the legs are made from
Specifically moulded to fit the contours of your vehicle's roof
Simple and effective leg clamp attachment is easy to install and remove
2500 features Rhino-Rack Heavy Duty bars with wind noise reducing VGS strips
Offers long-term performance
Suitable for light off-road use
Compatible with a wide range of accessories
Easy to install / remove
Stylish
Tested and approved to Australian Standards AS1235-2000
Rhino-Rack
Pioneer Platform
Regular price$0.00
The black powder-coated design is not only sleek it also makes your everyday life on and off the road easier. You can load and unload your equipment in moments. The Pioneer Platform is made from reinforced nylon and aluminium which creates a lightweight strength that is seriously durable. These non-corrosive Pioneer Platforms have withstood testing in the harshest conditions around the world so you know they can be trusted.
Features
Loading and unloading your equipment is easy. Simply slide your gear onto the Pioneer Platform and tie them down to the bars. The best thing about the Pioneer Platform is that it has been specifically designed to carry existing Rhino-Rack accessories including luggage bags, jerry can holders, spare wheel holders, shovels and loads more.
Rhino-Rack also offers the flexibility of allowing you to purchase the available rail kits if you wanted to add rails to your platform.
Features:
Stylish and aerodynamically designed to minimise wind drag and noise on the road
Non corrosive so it won't rust or fade
Made from strong and durable materials and allows you maximum carrying capacity
Compatible with many Rhino-Rack accessories
Additional rail kits are available
Tested for Australian conditions
ARB
Roof Racks
Regular price$0.00
Extensively tested in outback conditions, which they passed with flying colours, these cages are truly worthy of our ARB badge.
Identical to the steel equivalents in terms of size and fitment; i.e., 4900040M is interchangeable for any application that takes a 3800040M.
Fully 40% lighter than the steel cage, these are ideal for customers who wish to remove and refit their racks between trips.
All cages feature high strength alloy construction using a combination of tig and the acclaimed CMT (cold metal transfer) revolutionary welding process.
The gauge of the material has been increased over the steel equivalent to ensure the strength our products are renowned for is retained.
Special amplimesh alloy mesh floors are standard in all cages.
Rated to the same 150kgs that the steel cages are (subject, of course, to the vehicle manufacturer's maximum load rating).
The alloy in use is a 6000 series T4 - an optimum specification for the application.
Finished in the popular millennium gray powder coat for superior appearance and durability.
Importantly, the leg and or fitting kits required are the same proven steel 37 series kits. This basket will fit multiple applications. A vehicle specific fitting kit will be required. Click on the vehicle applications guide link to determine which part numbers will fit your vehicle.
